Home
The seamless gutter company are specialists in the installation of affordable pre-painted seamless aluminium guttering systems. With over 3,000 miles fitted to date this is the undisputed solution for replacement guttering. Contact us for a free no obligation quotation
Seamless Guttering

Seamless Guttering

Seamless Guttering company are specialists in the installation of affordable pre-painted seamless aluminium guttering systems. With over 3,000 miles fitted to date this is the undisputed solution for replacement guttering. Contact us for a free no obligation quotation

Seamless Guttering

 

Seamless Guttering company are specialists in the installation of affordable pre-painted seamless aluminium guttering systems. With over 3,000 miles fitted to date this is the undisputed solution for replacement guttering. Contact us for a free no obligation quotation.

The Seamless Guttering system, also called a continuous gutter, is a little misleading in its name, since there actually are seams in the system. These occur only at the corners and instead of slip fittings, these joints are connected sealed using a two part connecting system for stability and leak resistance.

The gutter runs themselves are continuous and by using internal fixing brackets they are both strong and visually more appealing.

Most guttering today is plastic and its great, relatively cheap and effective but it can carry some problems. If it is not put up professionally it can leak, the joints can "creep" open and leak and the colour is likely to fade in the sunlight.

Seamless Guttering says that an alternative to plastic is seamless aluminium which has no such problems. Sheet aluminium is roll formed on site from a machine sited in the back of the installers van. The machine turns out gutter in an attractive ‘Ogee’ shape and the rolls of aluminium come in various colours. The ‘Ogee’ profile means that not only can this type of gutter look attractive on new buildings, it is the shape of guttering used in times gone by and so means that it can be used as a good match on older properties.

Seamless Guttering

Seamless Aluminium gutters are 5 inches (125mm) wide as opposed to the 4 inches (100mm) of the plastic gutters meaning they can deal with and carry a much higher rainwater capacity.

 

Seamless Guttering tell us that after the gutter is formed, internal brackets are clipped into the gutter shape and the gutter is measured on the roof for the position of the down pipe. The gutter is then screwed to the fascia board and a plastic insert with leaftrap is sealed in position to direct water into the down pipe and a stop end is sealed to the end of the gutter. It’s quick and easy for our trained installers to fit and in many instances is no more expensive than plastic gutters but will last a lifetime if installed correctly.

 

Seamless Guttering